Türkçe  
   
   POWER RESISTORS
Neutral Grounding Resistors
Generator Neutral Grounding &
Leads Cubicles
Inverter Braking Resistors
Motor Starting &
Control Resistors
Cubicle Heaters
Harmonic Filter Resistors
Current Limiting Resistors
RC Filters
   REACTORS
Current Limiting Reactors
Neutral Grounding Reactors
Shunt Reactors
Harmonic Filtering Reactors
Motor Starting Reactors
Electric Arc Furnace Reactors
Smoothing Reactors
Line and Load Reactors
Test Laboratory Reactors
   TESTING SYSTEMS
Turn-key Short Circuit
Laboratories
High Current Injection Test Sets
R - L - C Load Banks
   SWITCHGEAR
CAPACITOR SWITCHING MODULE
   
   
 
HOME
ABOUT US
CONTACT US
CAREERS
SITE MAP
   
     
   

INJECTION TEST SETS
(TYPE : AK23 - AK43 - AK63)

injectiontest

AK63 (60 kVA)

 

AREAS OF USAGE
 

- Three phase primary current injection
- Testing of protection relays
- Thermal and magnetic device testing
- Temperature rise test and trip test of circuit breakers and junction points

 

Technical Features

AK23 (16,5 kVA)

AK43 (30kVA)

AK63 (60kVA)

  Input

3x400 V 25 A

3x400 V 45 A

3x400 V 90 A

  First Output

3x (0-400)V 25 Aac

3x (0-400) V 45 Aac
------------

  Second Output

0-200V 25 A DC

0-200V 25 A DC

0-200 V 25 A DC

  Third Output

3x(0-2,5)V 3x(0-2000) Aac

3x(0-2.5)V 3x(0-4000)Aac

3x(0-3) V x (0-6000) A dc

  Weight

500 Kg

600 Kg

700+100 kg

  Dimensions

700x1000x1600mm

700x1000x1600 mm

1000x2000x1200 mm

  Transport

With Wheels

With Wheels

With Wheels

  Measurement of Temperature
  ( 6 probes)

Pt 100 4 meters 400 C°

Pt 100 4 meters 400 C°

20 pcs K thermocouple 400C° 4 meters

  Three Ammeters

3x (0 - 1999) A

3x(0 - 4.00) kA

3x(0-6.00) kA
  Cooling Method F A N

  Computer Interface (Optional)

RS 232 / RS 485 (Wireless on demand)

  Datalogger (Optional)

up to 32 temperature probes

 
 

(AK23 - AK43 - AK63) OPERATING INSTRUCTIONS

 
Depending on the test to be performed, turn the position switch (3x2,5 V 4000 A or 3x380 V 45 A ) to the proper selection. Install the intermediate connections with maximum 2A/mm 2 current density cables which have equal cross-sections and equal lenght. If any gap is left between current carrying cables, because of the effect of inductance, 4000 A can not be reached. The best solution is to have a touch between current carrying cables. Thermometer probes must be connected to the measurement points with tongs or tapes.
 
 
 
 
HOME  .  ABOUT US  .  CONTACT US  .  CAREERS  .  SITE MAP